51 13 280 Removing And Installing Trim Strip On Roof Frame At Left Or Right

Lever out trim strip (1) with special tool 00 9 321 at rear and unclip the rest.

Fig 1: Removing Trim Strip With Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, replace faulty clips (1) or seals (2) on trim strip (3).

Fig 2: Locating Clips And Seals On Trim Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

1. Slide trim strip (1) at front into seal (2), clip in at front and rear so it is flush with edge (3) and then clip in the rest.
   Fig 3: Installing Trim Strip Into Seal

   Courtesy of BMW OF NORTH AMERICA, INC.