51 16 211 Removing And Installing/Replacing Finisher For Storage Tray

Version With Automatic Transmission Only: 

1. Remove finisher for preselector lever, refer to 51 16 210 REMOVING AND INSTALLING/REPLACING FINISHER FOR PRESELECTOR LEVER .

Jerkily remove knob (1) for selector lever towards top.

Lift out rubber gaiter (2).

Unscrew bolts (1).

Remove finisher (2) towards rear/top.

Disconnect plug connections and remove finisher (2).

Replacement only:

Unlock lock (1), unscrew switch (2) towards top from support (3) and remove from finisher (4) for storage tray.

Installation: 

1. Check function.
   Fig 3: View Of Lock

   Courtesy of BMW OF NORTH AMERICA, INC.