51 45 185 Removing And Installing/Replacing Trim For Pedal Assembly

Release screws (1) and expansion rivets (2).

Unlock rotary clip (3) (turn through 90°).

Fig 1: Locating Screws And Expansion Rivets

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock left/right retaining clips (1) and fold trim (2) down.

Fig 2: Identifying Left/Right Retaining Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Remove and feed out footwell light (1).

Disconnect plug connection (2) from gong.

Release lock (3) and press out plug (4) through opened OBD socket.

Replacement only:

Release locks (5) and remove OBD socket (6).

OBD = on-board diagnosis.

Fig 3: Disconnecting Plug Connection From Gong

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only:

Unlock gong (1) and remove from trim (2).

Fig 4: Locating Gong In Trim

Courtesy of BMW OF NORTH AMERICA, INC.