51 43 063 Removing And Installing/Replacing Upper Section Of Rear Left Or Right Armrest (Coupe)

NOTE: Place a clean cleaning cloth between special tool 00 9 318 and armrest (risk of damage).

Lever out upper section (1) at front with special tool 00 9 318 (universal wedge) towards top.

Fig 1: Aligning Upper Section At Front With Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip rest of upper section (1) towards top.

Pull upper section (1) towards front/top off armrest (2).

Fig 2: Removing Upper Section Of Armrest

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Plastic pins (1) and guide (2) on upper section (3) must not be damaged.

Fig 3: Locating Plastic Pins And Guide On Armrest
Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

During removal, clips (1) can be pulled out with the upper section.
If necessary, replace faulty clips (1) on armrest (2).
Before the upper section is installed, all clips (1) must be in the armrest supports (2).

Fig 4: Identifying Clips On Armrest
Courtesy of BMW OF NORTH AMERICA, INC.