51 47 000 Removing And Installing/Replacing Front Left Or Right Entrance Cover Strip (Inside) (Coupe)

Using special tool 00 9 318 (universal wedge), lever entrance cover strip (1) at front out of first clip (2) towards top.

Fig 1: Locating Entrance Cover Strip Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Press radius (2) of entrance cover strip (1) downwards and at same time slide forward out of clips.

Remove entrance cover strip (1).

Fig 2: Identifying Entrance Cover Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Pull out clips (1) with pliers (head of pliers surface-ground).

Fig 3: Removing Clips With Pliers

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace defective clips (1).

Fig 4: View Of Clips In Entrance Cover Strip

Courtesy of BMW OF NORTH AMERICA, INC.