51 16 201 Replacing oddments tray (Z3 Roadster, M Roadster, Z3 Coupe, M Coupe): Installation:

Clip tray (1) correctly into frame (2).

Fig 1: Installing Tray Into Frame

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip tray (1).

Fig 2: Unclipping Tray

Courtesy of BMW OF NORTH AMERICA, INC.

Remove cigar lighter (1).

Unfasten left / right screws (2) and remove left / right finisher strips (3).

Fig 3: Removing Left / Right Finisher Strips

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten screws (1) and remove selector lever finisher strip (2).

Fig 4: Removing Selector Lever Finisher Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Insert correctly in supports (3).

Unfasten screws (1) and remove radio finisher strip (2).

Fig 1: Removing Radio Finisher Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Remove speed nuts (1).

Fig 2: Removing Speed Nuts

Courtesy of BMW OF NORTH AMERICA, INC.