General points:

The rear spoiler is glued to the rear window. In order to obtain a perfect bond, you must follow the installation procedure described below.

After installation, the rear spoiler must be secured with yellow plastic adhesive tape (sourcing reference: BMW Parts Service); the paint must therefore be completely hardened after painting work.

• In winter, the vehicles must be kept in a room with a minimum temperature of 15°C.

When working with adhesive products (glue, cleaning agent, glass primer etc.):

• Wear protective goggles, protective gloves and, if necessary, aprons.
• Ensure rooms are well ventilated.
• Change work clothing which has been contaminated with adhesive immediately.
• Change work clothing which has been contaminated with solvents and swelling agents immediately (always keep a spare change of work clothing)
• Take skin protection precautions, provide washing facilities with hot water and use skin creams that do not contain silicone
• Keep eye baths on hand, change water regularly (once a month)
• Observe all relevant safety regulations
• Do not eat, drink or smoke in areas where PUR is being processed