61 31 115 Replacing rocker switch for side-window operation

Pass a feeler gauge at arrowed positions (1 to 4) between door trim panel and toggle switch and press down retaining clips.

Raise toggle switch at relevant position until retaining clip slides out of door trim panel.

Pull out toggle switch and disconnect plug connection.

Fig 1: Removing Power Window Switch

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, remove door trim panel, refer to 51 41 000 REMOVING AND INSTALLING LEFT OR RIGHT FRONT DOOR TRIM PANEL .

Fig 2: Identifying Power Window Switch Retaining Clips

Courtesy of BMW OF NORTH AMERICA, INC.