Torque Specifications
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2005 BMW 330xi, 2005 BMW 325xi, 2004 BMW 330xi, 2004 BMW 325xi, and 2003 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Center Mount-To-Body | 15 (21) | ||
| Cross Member-To-Body | 15 (21) | ||
| Driveshaft-To-Drive Flange | |||
| Version, Universal Joint: Compression Nut | 47 (64) | ||
| Version, Universal Joint: Torx Bolt | 63 (85) | ||
| Version, Constant-Velocity Joint: Torx Bolt | 52 (70) | ||
| Version, Constant-Velocity Joint: Compression Nut M8 Thread | 24 (32) | ||
| Compression Nut M10 Thread | 47 (64) | ||
| Finned Nut M8 Thread | 32 (43) | ||
| Finned Nut M10 Thread | 52 (70) | ||
| Flexible Disk-To-Propeller Shaft & Transmission Output Flange | |||
| M10 8.8 Thread | 35 (48) | ||
| M10 10.9 Thread | 47 (64) | ||
| M14 Thread | 103 (140) | ||
| M12 10.9 Thread | 74 (100) | ||
| Torque Converter-To-Flywheel | 33 (45) | ||
| Transfer Case-To-Transmission | 32 (43) | ||
| Transmission Cross Member-To-Rubber Mounts | 55 (74) | ||
| Transmission Cross Member-To-Body | 15 (21) | ||
| Transmission-To-Engine | |||
| Hex Screws | |||
| M8 Thread | 18 (24) | ||
| M10 Thread | 33 (45) | ||
| M12 Thread | 60 (82) | ||
| Torx Bolts | |||
| M8 Thread | 15 (21) | ||
| M10 Thread | 31 (42) | ||
| M12 Thread | 53 (72) | ||
| INCH Lbs. (N.m) | |||
| Clamping Screw On Shift Lever | 89 (10) | ||