64 11 932 Replacing evaporator temperature sensor (A/C control)

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, and 2001 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Remove right glovebox. Refer to 51 16 360 REMOVING AND INSTALLING RIGHT GLOVE BOX .

E39, E53:

Unclip air duct for right footwell (1) and pull out in direction of arrow.

Fig 1: Identifying Air Duct For Right Footwell

Courtesy of BMW OF NORTH AMERICA, INC.

Break out repair cover (1) with pointed pliers in direction of arrow.

Disconnect connector (2).

Fig 2: Disconnecting Plug Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug of faulty evaporator temperature sensor (1) and pull out in direction of arrow.

NOTE: Secure plug of faulty evaporator temperature sensor with fabric adhesive tape.

Insert new evaporator temperature sensor in opening (2) and lock into place.

Fig 3: Unlocking Plug Of Evaporator Temperature Sensor

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure evaporator temperature sensor (1) and cable (2) are correctly seated.

Fig 4: Identifying Evaporator Temperature Sensor And Cable

Courtesy of BMW OF NORTH AMERICA, INC.