84 11 530 Removing and installing/replacing interface for D-Network car phone

Remove center armrest, refer to 51 16... REMOVING AND INSTALLING/REPLACING CENTER ARMREST .

Unlock plug connection (1) and disconnect.

Unclip antenna plug (2).

Turn holder (3) and remove.

Remove interface (4) in direction of arrow.

Installation  :

Snap lug (5) into guide (6).

Fig 1: Removing D-Network Car Phone Interface

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement  :

Unclip plug housing (1) and disconnect from holder (2).

Fig 2: Removing Plug Housing

Courtesy of BMW OF NORTH AMERICA, INC.