33 55 Stabilizer Bar
STABILIZER BAR TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Stabilizer to trailing arm (tighten in normal position) | E30, E31, E36/Z3, E36/Compact | M8 | 22 Nm | |
| E31 | M10 | 42 Nm | ||
| 2AZ Stabilizer link on anti-roll bar/swinging arm | E38 | 42 Nm | ||
| E39/E52 | 65 Nm | |||
| E53 | 100 Nm | |||
| E60/E61/E63/E64/E83 | M10 | 65 Nm | ||
| E65/E66/E67 | M10 | 58 Nm | ||
| E60/E61/E63/E64/E65/E66/E67 | M12 | 100 Nm | ||
| 3AZ Retaining bracket, stabilizer bar to rear axle support | E52/E85 | 22 Nm | ||
| E53 | 19 Nm | |||
| E60/E61/E63/E64 | M8 | 28 Nm | ||
| E65/E66/E67 | M10 | 60 Nm | ||
| E83 | M8 | 21 Nm | ||
| 4AZ Stabilizer link to bracket | E85 | M8 8.8 | 22 Nm | |
| 5AZ Bracket stabilizer link to upper control arm | E85 | M8x20 8.8 | 22 Nm |