33 21 Output Shaft

OUTPUT SHAFT TIGHTENING TORQUE SPECIFIACTIONS

	Type	Thread	Tightening specification	Measure
1AZ Output shaft to final drive unit and drive flange
Fillister head bolt	All	M10	Replace screws	83 Nm
with locking teeth	All	M10	Replace screws and washers	96 Nm
	All	M12	Replace screws	110 Nm
Torx bolt	All	M10	Replace screws	83 Nm
with ribbed teeth Color: BLACK	All	M10	Replace screws	100 Nm
	All	M8	Replace screws	64 Nm
with ribbed teeth Color: SILVER	All	M10	Replace screws	80 Nm
	All	M8	Replace screws	52 Nm
with ribbed teeth	All	M12	Replace screws	135 Nm