Removal & Installation
- Apply pedal prop and depress brake pedal slightly. This prevents brake fluid from flowing out of expansion tank and into brake system when brake lines are opened.
- Suck brake fluid out of expansion tank with a suction device used exclusively for drawing off brake fluid.
- Ensure that square head screw on brake hose does not rotate in metal bracket. If necessary, brace brake hose with mold grips. Unfasten brake hose from brake caliper.
- Brake pipes are only supplied straight, in correct length and fitted with connecting nipples. Bend new pipe as required using Bending Tool (34 5 100). Removed pipe can be used as template.
- If replacing front brake pipe, move wheels into straight-ahead position. Install new pipe and tighten to specification. See TORQUE SPECIFICATIONS .
- Remove pedal prop and bleed brake system. See BLEEDING BRAKE SYSTEM .