51 12 432 Replacing body molding for center rear bumper (Touring)

1. Remove side molding for rear bumper, left and right, refer to REPLACING LEFT OR RIGHT SIDE MOLDING FOR REAR BUMPER  .

Unclip and remove molding (1) with special tool 00 9 321 (folding leg).

Fig 1: Unclipping & Removing Molding

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

1. Clips (1) and bore (2) of molding (3) must not be damaged.
   Fig 2: Installing Clips and bore of molding

   Courtesy of BMW OF NORTH AMERICA, INC.