61 71 004 Adjusting windshield washer spray nozzles

NOTE: The sprays must strike in the center of the area. Measurements apply to LHD models. Measurements are mirror-inverted for RHD models. Reference edge: windshield seal.

Fig 1: Identifying Windshield Spray Measurements

Courtesy of BMW OF NORTH AMERICA, INC.

Mark points of contact with adhesive tape.

Adjust spray nozzles using special tool 00 9 200.

Fig 2: Adjusting Spray Nozzles Using Special Tool (00 9 200)

Courtesy of BMW OF NORTH AMERICA, INC.