LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2002 >> 325Ci 2D Convertible, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Body Equipment - Repair >> Trim, Covers, Handle Trim >> 51 13 402 Removing and installing handle strip (on trunk lid)

51 13 402 Removing and installing handle strip (on trunk lid)

Version from 10/99:

Remove panel for rear lid in rear area. See 51 49 000 Removing and installing or replacing trim for trunk lid 

Feed out wiring harness (2) in direction of arrow from bracket (1).

Fig 1: Feeding Out Wiring Harness In Direction Of Arrow From Bracket
G03164907Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (3).

Release screws (1) and withdraw handle strip (2) somewhat.

Fig 2: Releasing Screws And Withdraw Handle Strip Somewhat
G03164908Courtesy of BMW OF NORTH AMERICA, INC.

Version from 10/99:

Remove strip handle (2).

Installation: 

Tightening torque, refer to 51 13 4AZ in BODY EQUIPMENT - TIGHTENING TORQUES - 325I, CI & XI - E46 .

Check function.

Version up to 10/99:

Disconnect plug connection (1) and remove handle strip (2).

Fig 3: Disconnecting Plug Connection And Remove Handle Strip
G03164909Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Tightening torque, refer to 51 13 4AZ in BODY EQUIPMENT - TIGHTENING TORQUES - 325I, CI & XI - E46 .

Check function.

scientia non olet · About LEMON Manuals