51 22 330 Removing and installing/replacing window cavity cover strip on inside rear door

Remove rear door trim,

refer to 51 42 000 REMOVING AND INSTALLING REAR LEFT OR RIGHT DOOR TRIM PANEL .

Installation: 

1. If necessary, remove faulty clips (3) from inner door panel and replace.
   Fig 1: Removing Faulty Clips From Inner Door Panel

   Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

1. Prior to installation, coat window cavity cover strip (1) with soapy solution (washing-up liquid).

Fig 2: Identifying Window Cavity Cover Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

1. Window cavity cover strip (1) must (as shown in illustration) be above cover (2) for door window frame.
   Fig 3: Window Cavity Cover Strip (1) Must Be Above Cover (2) For Door Window Frame

   Courtesy of BMW OF NORTH AMERICA, INC.