51 16 211 Removing and Installing/replacing finisher for storage tray
Version with automatic transmission only:
Remove finisher for preselector lever,
refer to 51 16 210 REMOVING AND INSTALLING / REPLACING FINISHER FOR PRESELECTOR LEVER .
Jerkily remove knob (1) for selector lever towards top.
Lift out rubber gaiter (2).
Unscrew bolts (1).
Remove finisher (2) towards rear/top.
Disconnect plug connections and remove finisher (2).
Replacement only:
Unlock lock (1),
unscrew switch (2) towards top from support (3) and remove from finisher (4) for storage tray.
Installation:
- Check function.