51 16... Replacing left or right outside mirror housing
Remove mirror glass, refer to 51 16 026 REPLACING MIRROR GLASS FOR REAR-VIEW MIRROR (ON FRONT DOOR) .
Tilt exterior rearview mirror towards front.
NOTE:
Unlock catch (2) with special tool 00 9 321 (folding leg).
Unlock catches (1) and (2) and remove housing.
Installation:
- Catches on casing (2) must not be damaged.
Tilt exterior rearview mirror fully forward again.
Release screws (1).
Lift out catches (2) and remove "housing frame" (3).
Installation:
- Catches (1) on housing frame (2) must not be damaged.
- Check function.