51 15 330 Removing and installing or replacing body molding on left or right front door

Unclip rubbing strip (1).

Fig 1: Uncliping Rubbing Strip

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, lift clips off doors.

Installation: 

1. If necessary, replace faulty rubber grommets (1) and clips (2).
   Fig 2: Replacing Faulty Rubber Grommets And Clips

   Courtesy of BMW OF NORTH AMERICA, INC.
2. Attach clips to body molding in rubber grommet and align.
3. Prior to installation, coat rubber grommets (1) with soapy solution (washing-up liquid).

Clip rubbing strip into door.