LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2002 >> 325Ci 2D Convertible, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Repair (E46) >> Testing >> Service Brake >> On Test Stand

On Test Stand

WARNING: Use only brake dynamometers whose test speed is 3 MPH (5 km/h) or less. Follow without fail guidelines contained in operating instructions of relevant test stand manufacturer. Failure to do so may result in damage to vehicle and system and also, personal injury.
  1. On cars equipped with ASC+T or DSC, system must be deactivated with the switch. ASC+T/DSC indicator lamp in instrument cluster must light up.
  2. The brakes must be at normal operating temperature. To achieve this, brake the car several times to slightly warm and dry brake disks and drums.
  3. Check tires for damage. Check tire treads and pressures.
scientia non olet · About LEMON Manuals