LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2002 >> 325Ci 2D Convertible, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Repair (E46) >> Removal & Installation >> Master Cylinder >> Installation

Master Cylinder: Installation

  1. Install master brake cylinder to brake unit. Replace self-locking nuts and tighten to specification. See TORQUE SPECIFICATIONS .
  2. Attach and tighten screw connections of brake lines and tighten to specification. See TORQUE SPECIFICATIONS .
  3. Push expansion tank vertically onto master brake cylinder.
  4. Refill brake fluid and bleed system. See BLEEDING BRAKE SYSTEM .
scientia non olet · About LEMON Manuals