Disc Brake Specifications
DISC BRAKE SPECIFICATIONS
| Application | mm | |
|---|---|---|
| Front | ||
| Different thicknesses on brake linings | 0.01 (max) | |
| Max. machining limit per friction ring side (M vehicles and perforated brake discs must not be machined). Brake disc minimum thickness (MIN TH) must not be undershot. | 0.8 | |
| Nominal size (diameter x thickness) | 325x25 | |
| Brake disc minimum thickness (MIN TH) stamped on brake disc body | 23.4 | |
| Nominal size (diameter x thickness) | 300x22 | |
| Nominal size (diameter x thickness) | 286x22 | |
| Nominal size (diameter x thickness) (M3) | 345x28 | |
| Nominal size (diameter x thickness) (M3) | 325x28 | |
| Brake disc minimum thickness (MIN TH) stamped on brake disc body | 20.4 | |
| Brake disc minimum thickness (MIN TH) stamped on brake disc body (M3) | 26.4 | |
| Wear warning from residual lining thickness | 3.0 | |
| Rear | ||
| Different thicknesses on brake linings | 0.01 (max) | |
| Max. machining limit per friction ring side M vehicles and perforated brake discs must not be machined). Brake disc minimum thickness (MIN TH) must not be undershot. | 0.8 | |
| Nominal size (diameter x thickness) | 320x22 | |
| Nominal size (diameter x thickness) (M3) | 328x20 | |
| Brake disc minimum thickness (MIN TH) stamped on brake disc body | 20.4 | |
| Brake disc minimum thickness (MIN TH) stamped on brake disc body (M3) | 18.4 | |
| Nominal size (diameter x thickness) | 294x19 | |
| Nominal size (diameter x thickness) | 276x19 | |
| Brake disc minimum thickness (MIN TH) stamped on brake disc body | 17.4 | |
| Nominal size (diameter x thickness) | 280x10 | |
| Brake disc minimum thickness (MIN TH) stamped on brake disc body | 8.4 | |
| Wear warning from residual lining thickness | 3.0 | |
| Parking Brake | ||
| Parking brake drum diameter | 160 | |
| Max. radial runout of braking surface | 0.1 | |
| Min. liner thickness | 1.5 | |