51 34 000 Removing and installing/replacing window crank, rear left or right

Remove plate (1).

Installation: 

1. Guide (1) and catch (2) if finisher (3) must not be damaged.
2. If necessary, replace faulty finisher (3).

Unscrew bolt (1).

Remove window crank (2) and rosette (3).

Installation: 

1. Fit window crank (2) in this position with door window glass closed.

Installation: 

1. Insert rosette (1) with turning lock (2) in opening (3) of door trim panel.
   Fig 4: Inserting Rosette With Turning Lock In Opening Of Door Trim Panel

   Courtesy of BMW OF NORTH AMERICA, INC.