51 21 146 Replacing locks for simultaneous closing with EWS control module
Replace locks for simultaneous closing,
refer to 51 21 145 REPLACING LOCKS FOR SIMULTANEOUS CLOSING .
Remove panel for pedals,
refer to 51 45 185 REMOVING AND INSTALLING/REPLACING TRIM FOR PEDAL ASSEMBLY .
- Disconnect battery negative lead
- Disconnect plug connection on control module for electronic immobilizer and remove control module
- Install new control module
- Connect battery negative lead
- Connect DIS Tester or MoDiC III
- Select model
- Select coding program
- Read out data
- Code EWS control module
- Terminate coding program
- Carry out function check