LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2001 >> M3 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Seats >> Seats - Repair >> Rear Seat, Through-Loading >> 52 26 008 Removing and installing/replacing left or right side section of rear seat backrest (through-loading system) (Coupe)

52 26 008 Removing and installing/replacing left or right side section of rear seat backrest (through-loading system) (Coupe)

Remove trim on side section of rear seat backrest, refer to 51 43 ... REMOVING AND INSTALLING/REPLACING TRIM ON REAR SEAT BACKREST SIDE SECTION (COUPE) .

Remove rear seat, refer to 52 26 005 REMOVING AND INSTALLING/REPLACING REAR SEAT (THROUGH-LOADING SYSTEM)  .

Release rear-seat backrest and fold forward.

Fig 1: Releasing Rear-Seat Backrest
G03119401Courtesy of BMW OF NORTH AMERICA, INC.

To unlock backrest side section:

Press cover in area (A) to one side a little.

Using a screwdriver, press catch (1) downwards and pull backrest side section (2) somewhat towards front.

Pull side section at top (1) and pull out towards top (2).

Fig 2: Pulling Out Side Section
G03119402Courtesy of BMW OF NORTH AMERICA, INC.

In event of faulty clip (2):

If necessary, unlock catches (1) on left/right and detach clip (2) from side section (3).

Fig 3: Identifying Catches
G03119403Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Push guide (1) into bracket (2) and guide (3) into bracket (4).

Fig 4: Installing Guides Into Bracket
G03119404Courtesy of BMW OF NORTH AMERICA, INC.