LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2001 >> 750iL >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Equipment - Repair Instructions >> Front electrically operate >> 51 33 000 Removing and installing electric window regulator in left or right front door

51 33 000 Removing and installing electric window regulator in left or right front door

Disconnect negative battery lead.

Adjust front door window,

refer to 51 32 154 ADJUSTING DOOR WINDOW GLASS, FRONT LEFT OR RIGHT (PROTECTION) 

Version with side airbag in front door:

Removing and installing airbag module on left or right front door. Refer to SIDE AIR BAG MODULE .

Disconnect door handle and remove.

Fig 1: Disconnecting Door Handle
G03214679

Press down connector fastener, slide lever downwards and remove connector (1) (loudspeaker).

Unfasten screws and remove loudspeaker box (2).

Fig 2: Removing Loudspeaker Box
G03214680

Unlock connector (1) and remove. Unfasten screws (3) and remove control unit (4).

Cut through cable connector and remove cable holder (2) (expanding rivets).

Completely remove acoustic insulation.

Fig 3: Removing Cable Holder (Expanding Rivets)
G03214681

Lift door window (1) upwards and wedge into place with wooden chock (2).

Remove connector from window regulator drive unit.

Unfasten screws (only loosen lower 3 screws) and remove complete cable on window regulator.

Fig 4: Removing Connector From Window Regulator Drive Unit
G03214682

Installation: 

  1. Install window regulator in locating bracket and install all screws loose.
  2. Tighten down screws (1) and (2).
Fig 5: Installing Window Regulator Bracket
G03214683

Installation: 

  1. Installing door window in clamps of window regulator and adjusting door window,
  2. refer to 51 32 154 ADJUSTING DOOR WINDOW GLASS, FRONT LEFT OR RIGHT (PROTECTION) 
    Fig 6: Adjusting Door Window
    G03214684

Installation: 

  1. Lower door window down to stop.

Tighten down screws (3) and (4).

Fig 7: Identifying Screws For Tightening (1 Of 2)
G03214685

Installation: 

  1. Close door window firmly.

Tighten down screws (5) and (6).

Fig 8: Identifying Screws For Tightening (2 Of 2)
G03214686