61 13 ... Relay carrier

Place special tool 61 1 153 on relay carrier (1) and carefully pull in direction of arrow until retaining lugs (2) on relay carrier are raised.

Fig 1: Placing Special Tool 61 1 153 On Relay Carrier (1) And Carefully Pulling In Direction Of Arrow Until Retaining Lugs (2) On Relay Carrier Are Raised

Pull relay carrier (2) in direction of arrow into first catch (3).

Fig 2: Pulling Relay Carrier

Press down arrester hook (4) of appropriate contact and pull out cable with contact.

Fig 3: Pressing Down Arrester Hook (4) Of Appropriate Contact And Pulling Out Cable With Contact

Press out double flat spring contact with special tool 61 1 136 or 61 1 137 (ejector).