Damage To Paintwork In Body Cutout:

To ensure long-term corrosion protection, it is absolutely essential to touch up any damage to paintwork!

Touch up damage to paintwork on body cutout with BMW MS-AK multibase filler (gray or red/brown).

Grind out scratches in non-visible areas and touch up with BMW MS-AK multibase filler.

Grind large areas of damage right down to polished metal and coat with BMW MS-AK multibase filler (coat thickness 30 ... 40 μm).

Hardening time:

• with infrared at least 10 minutes.
• without infrared at least 4 ... 6 hours at min. 18°C.

If a complete build-up of paint is necessary in the visible area:

• Remove adhesive from primed adhesive flange before applying the top coat.