51 41 001 Replacing front left or right door trim

Pull wooden strip backwards to remove.

Fig 1: Pulling Wooden Strip Backwards

Installation:

If necessary, replace damaged clips and/or grommets for wooden strip.

Fig 2: Removing Damaged Clips And/Or Grommets For Wooden Strip

Lift out locking unit and pull grommet (1) for locking button upwards.

Unfasten nut (2) and remove retaining bracket (3).

Fig 3: Identifying Grommet, Nut And Retaining Bracket

Installation:

Fit window and spring circlip.

Only version without side airbag:

Unfasten speed nuts (1) and remove top insert with frame.

Fig 4: Unfastening Speed Nuts (1) And Removing Top Insert With Frame

Only version without side airbag:

Unfasten screws and remove finisher (1) and bracket (2) from insert (3).

Fig 5: Removing Finisher And Bracket

Only version without side airbag:

Remove insert (1) from frame (2).

Fig 6: Removing Insert From Frame

Unfasten speed nuts (1) and remove inserts from door trim.

Fig 7: Unfastening Speed Nuts (1) And Removing Inserts From Door Trim

Unfasten screws and remove toothed discs (1).

Remove folding box and loudspeaker finisher (2) from door trim.

Fig 8: Removing Folding Box And Loudspeaker Finisher

Remove toothed discs and pull loudspeaker and finisher forwards.

Installation:

Fit new toothed discs.

Fig 9: Installing Toothed Discs