LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2001 >> 740i >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Equipment - Repair Instructions >> Floor - Lugg. Comp. - Engine >> 51 47 151 Removing and installing/replacing trunk wheel housing trim, left

51 47 151 Removing and installing/replacing trunk wheel housing trim, left

Remove and install flap in luggage compartment trim, left and right, refer to 51 47 172 REMOVING AND INSTALLING/REPLACING FLAP IN LUGGAGE COMPARTMENT TRIM, LEFT OR RIGHT .

Version with ski bag:

Release expansion rivet (1).

Remove trunk wheel housing trim (2), lift over lashing eye (3) and lift out of ski bag frame (4).

Installation: 

First feed into ski bag frame (4).

Fig 1: Removing Trunk Wheel Housing Trim
G03226952

Replacement only (version with ski bag):

Release plastic screw fitting (1) and detach trim panel components (2) and (3).

Installation: 

Plastic screw fitting (1) is only pressed together during installation.

Fig 2: Identifying Plastic Screw Fitting Is Only Pressed
G03226953

Version with ski bag:

Release expansion rivet (1).

w (2), lift over lashing eye (3) and lift out of ski bag frame (4).

Installation: 

First feed into ski bag frame (4).

Fig 3: Plastic Screw Fitting (1) Is Only Pressed
G03226954

Replacement only (version with ski bag):

Release plastic screw fitting (1) and detach trim panel components (2) and (3).

Installation: 

Plastic screw fitting (1) is only pressed together during installation.

Fig 4: Releasing Plastic Screw Fitting
G03226955