LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2001 >> 330xi Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension - Repair - E46 >> Removal & Installation >> Shock Absorber >> Replacement

Shock Absorber: Replacement

  1. Remove support bearing.
  2. Remove or pull off disc (1), shim, auxiliary absorber (2) with protective tube (3) from shock absorber (4).
  3. Installation note: Check auxiliary absorber (2) and protective tube (3) for damage, replace if necessary.
Fig 1: Checking Shock Absorber
G04726541Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: After installation, check that output shaft is correctly seated in rear axle final drive.
scientia non olet · About LEMON Manuals