63 17 000 Removing and installing/replacing left or right fog lamp insert (saloon/sedan, touring)
Special Tools Required:
- 00 9 317
Up To 09/2001:
Lever out fog lamp insert (1) with special tool 00 9 317 and fold out in direction of arrow.
Installation:
- Feed detent lugs (1) into outer guide (2).
- Clip inner fog lamp insert into retainer.
Disconnect plug connection and remove fog lamp insert.
Replacement:
Adjust front fog lamps. See 63 10 014 Adjusting fog lamps
From 09/2001:
Left side only: Remove outside temperature sensor. See 65 81 060 REMOVING AND INSTALLING/REPLACING EXTERNAL TEMPERATURE SENSOR
Remove cover from front wheel housing. See 51 71 041 REMOVING AND INSTALLING/REPLACING REAR LEFT OR RIGHT WHEEL ARCH COVER
Disconnect plug connection (1).
Release screws (2) and remove fog lamp insert (3) in direction of arrow.
Installation:
Make sure ventilation grommet is laid without kinks and is sufficiently firmly seated.
Replacement:
- Adjust front fog lamps. See 63 10 014 Adjusting fog lamps