51 43 201 Removing and installing or replacing trim for front left or right roof

WARNING: Version with head airbag: Follow safety instructions for working on cars with airbag systems, refer to 51 00... SAFETY INSTRUCTIONS FOR WORKING ON CARS WITH AIRBAG SYSTEMS

CAUTION: Do not use sharp-edged tools to remove trim (risk of damage to head airbag).

Remove mucket from front roof pillar (A-pillar finisher).

Remove plate (1).

Fig 1: Removing Plate

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Lift out trim (2) at top (3) and remove towards inside/top.

Fig 2: Removing Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Install screws (1) with washers.
Tightening Torque, refer to 51 43 2AZ in BODY EQUIPMENT - TIGHTENING TORQUES - 325I, CI & XI - E46
.