51 16... Removing and installing/replacing insert in storage tray

Removal:

Press together insert (1) at front on sides and remove towards top.

Fig 1: Pressing Together Insert At Front On Sides

Courtesy of BMW OF NORTH AMERICA, INC.

Insert (1) is now unlocked from supports (2).

Remove insert (1) towards front/top.

Fig 2: Inserting Towards Front/Top

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Fig 3: Identifying Guides And Supports On Left/Right

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Install insert (1) at rear in center console (4).

Guide (2) must be positioned between supports (3) of center console (4), insert (1) can now be snapped towards bottom into place.

Fig 4: Installing Insert At Rear In Center Console

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only:

If necessary, remove rubber trays (1) and (2) with special tool 00 9 316 (sealing lip wedge).

Fig 5: Removing Rubber Trays With Special Tool 00 9 316

Courtesy of BMW OF NORTH AMERICA, INC.