51 16 195 Removing and installing center armrest
Remove storage tray, See 51 16 200 Removing and installing storage tray
refer to 51 16 200 REMOVING AND INSTALLING STORAGE TRAY .
Slacken screw (1), do not release.
Press down spring (2) and remove cable (3).
Feed out cables (3) and (4) through hole (5) in center armrest.
Unscrew bolts (1).
Installation:
- Fit screws (1) with space bushings (2).
Push center armrest (1) towards rear until screw (2) is located in assembly hole and remove armrest (1) towards top.
Installation:
- If necessary, replace faulty metal nuts (1) in center armrest (2).