Engine Drag Torque Reduction (MSR)

If the vehicle is driven in low gear when coasting down hill, or if there is a sudden shift to a lower gear, the wheels may be slowed by the engine's braking effect too rapidly. This could result in an unstable situation.

If the front wheels are turning faster than the rear wheels, the MK 60 control unit signals the DME via the CAN bus to raise  the engine torque. DME cancels fuel cut-off and allows the engine speed to increase, this allows the drive wheels to accelerate to match the speed of the non-driven wheels.

MSR regulation is cancelled if the brake pedal or hand brake are applied.