51 15 360 Removing and installing rubbing strip on rear door on left or right

Unclip rubbing strip (1).

Fig 1: Uncliping Rubbing Strip

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, remove clips from rear door.

Installation: 

1. If necessary, replace faulty rubber grommets (1) and clips (2).
2. Attach clips to body molding in rubber grommet and align.
3. Prior to installation, coat rubber grommet (1) with soapy solution (washing-up liquid).

Clip rubbing strip into rear door.

Fig 2: Clipping Rubbing Strip Into Rear Door

Courtesy of BMW OF NORTH AMERICA, INC.