51 32 160 Removing and installing/replacing cover (anti-trapping protection) on door window frame, left or right

Rear for outside trim (51 32 420) only:

Carefully lever out clip (1) and lever out cover (2) in rear area.

Additionally for complete removal:

Disconnect plug connection (3).

Carefully lever out clip (4) and lever out cover (2) completely.

Fig 1: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If applicable, replace defective clips (1).

Fig 2: Inspecting Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (1) on cover (2) must not be damaged.

Fig 3: Checking Clips On Cover

Courtesy of BMW OF NORTH AMERICA, INC.