12 61 280 Removing and installing/replacing oil pressure switch (M62): Notes

Switch off ignition.

NOTE: Drain the main flow oil filter in order to avoid an excessive discharge of oil when the oil pressure switch is removed.

Detach plug (1) from oil pressure switch.

Fig 1: Removing Plug From Oil Pressure Switch

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws.

Pull expansion tank (1) upwards and lay to one side.

NOTE: Lines on expansion tank remain connected.

Fig 2: Pulling Expansion Tank Upwards And Lay To One Side

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: A small amount of engine oil emerges when the oil pressure switch is removed. Have a cleaning cloth ready.

Unscrew oil pressure switch.