12 13 511 Replacing ignition coil (M60, M62): Installation:

Position acoustic cover and press downwards until press stud fasteners (1... 4) are heard to engage.

Fig 1: Positioning Acoustic Cover And Pressing Downwards Until Press Stud Fasteners

Courtesy of BMW OF NORTH AMERICA, INC.

Check profile seal (1) for damage and correct seating, replace if necessary.

Fig 1: Checking Profile Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections on ignition coils.

Fig 2: Disconnecting Plug Connections On Ignition Coils

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw connections on ignition coils.

Remove ignition coils.

Fig 3: Removing Ignition Coils

Courtesy of BMW OF NORTH AMERICA, INC.