12 31 020 Removing and installing/replacing alternator (M62): Notes

Switch off ignition.

Follow instructions for disconnecting and connecting battery, refer to General Information MG 12.

Disconnect and cover battery negative lead.

Only perform these tasks on an engine that has cooled down.

Remove alternator drive belt, refer to 11 28 010 .

Remove fan cowl, refer to 17 11 031 .

Drain coolant, refer to 17 00 005 .

Release bolts (1) on alternator.

Release nut (1).

Disconnect battery positive lead (2) from alternator.

Tightening torque, see 12 31 1AZ in ENGINE ELECTRICAL SYSTEM - TIGHTENING TORQUES .

Disconnect plug (3).

Release screw (4) and remove roller.

Release screws (5) on alternator.