System Components
Manual Operation - The manual adjustments of the seat, mirrors and steering column are carried out with the respective switches as with the previous systems.
The mirror adjustment switch is located in the driver's switch block. The mirror operation input is a digital signal that is processed by each respective module for mirror positioning.
Memory Storage - The parameters for storing memory positions are as follows:
- With the transmission range selector in "P" and the mirror change over switched to the left, switch the ignition on and press the "M" on the memory switch.
- The memory indicator lamp switches on for 7 seconds.
- Press one of the three position switches (1, 2 or 3) within the 7 second memory period.
- The current positions of the mirrors, seat and steering column are stored for recall.
The positions of the mirrors are stored in the respective door modules based on the position of the feedback potentiometers. The positions of the seat and steering column are stored in the seat module, based on the ripple count.
Recalling a memory position setting is possible by either pressing and holding the recall switch (1, 2 or 3) with KL 15 "ON" or tapping the recall button (1, 2 or 3) with:
- The driver's door open and KL 15 "OFF".
- KLRON and KL15"OFF".
The recall movement can be interrupted at any time by touching any of the adjusting switches.