Principle Of Operation: Notes
The interior light switch is a push button switch that will carry out the opposite command of the current status of the lights. (ie: if the interior lights are currently on, pushing the button will switch the lights off.)
- If the interior lights are switched "ON" by the button with the ignition switched ON, the interior lights will remain on until they are switched off by the button.
- If the interior lights are switched "ON" when the ignition is switched OFF, the lights will remain on for 16 minutes (consumer cutout).
- Pressing the interior light button for longer than three seconds will switch the lights to continuous off. This feature is intended for workshop use. Pressing the button again will return the lights to the normal operational status.
- Locking the vehicle from the outside will immediately switch off the interior lights.
The ON/OFF conditions for the interior lights in the automatic mode are as follows: