Windshield Wiper System Fail-Safe Operation
The GM provides fail-Safe operation of the wiper system if faults are detected with any of the following input signals:
FUNCTION SPECIFICATION
| Function | Faulted Input Detected | Fail-safe Function |
|---|---|---|
| Intermittent Wipe | Short or open circuit of the knurled wheel signal | Delay value for setting 3 used |
| Intermittent wipe With Rain Sensor | Faulted Rain Sensor or K-Bus Signal corrupt | Normal Intermittent wipe implemented |
| Wiper Motor not Functional Moving | Park contact feedback signal takes longer than 16 seconds | Wiper motor control deactivated for 3 minutes |