34 11 Front Brake
FRONT BRAKE TIGHTENING SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Brake disk to wheel hub (contact faces between brake disk and wheel hub cleaned and grease-free) | E39 / E38 / E46 / E52 / E53 / E83 / E65 / E66 / E67 / E60 / E61 / E63 / E64 | 16 Nm | ||
| 2AZ Brake caliper to steering knuckle (screws lightly oiled, contact surfaces between brake caliper and steering knuckle cleaned and grease-free) | E34, E36, E32, E31, E38, E39, E46, E52, E53, E30 / 325iX, E65, E66, E67, E83, E85, E60, E61, E63, E64 | 110 Nm | ||
| 2AZ with aluminum brake caliper | E31 | 115 Nm | ||
| E12, E21,E23, E24 to 5.82 | 95 Nm | |||
| E28, E30, E24, from 5.82 | 123 Nm | |||
| 3AZ Guide bolt | E39 / E38 / E46 / E52 / E53 / E83 / E65 / E66 / E67 / E60 / E61 / E63 / E64 | wrench size 7 mm | 30-5 Nm | |
| 4AZ Bolts to guidepin (always replace) | E30 | 35 Nm | ||
| 5AZ Protective plate to steering knuckle | E85, E83 | M6 | 9 Nm | |
| E67, E60, E61, E63, E64, E65, E66 | M6 | 12 Nm |