25 16 056 Removing and installing/replacing shift tower (Steptronic): Notes

IMPORTANT: Do not disassemble new Steptronic gearshift bracket.

NOTE: Identifying features of new Steptronic shift tower:

1 = Position, solenoid valve
2 = Black plastic section
3 = Aluminum section

Fig 1: Identifying Solenoid Valve, Plastic Section And Aluminum Section

NOTE: Move selector lever to parking position "P". Remove transmission underbody protection if necessary.

NOTE: Do not remove oddments tray in E38.

Installation:

The lines must be correctly clipped into the retaining clips so as to prevent damage (trapping of lines).

Grip clamping sleeve (1) and slacken nut (2).

Fig 2: Gripping Clamping Sleeve And Loosening Nut