00 00 M12 and M12x1.5 - maximum tightening torques acc. to BMW GS 90003-2
M12 and M12x1.5 -MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2
| ..... | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| Scope of applicability of tightening torques, Refer to EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 |
Surface color / (surface coating) | ..... | ..... | ..... |
| M12 thread | Yellow (ZN) | M12 8.8 | ..... | 82 Nm |
| ..... | Silver (ZNS) | M12 8.8 | ..... | 66 Nm |
| ..... | Yellow (ZN) | M12 10.9 | ..... | 115 Nm |
| ..... | Silver (ZNS) | M12 10.9 | ..... | 98 Nm |
| ..... | Yellow (ZN) | M12 12.9 | ..... | 140 Nm |
| ..... | Silver (ZNS) | M12 12.9 | ..... | 108 Nm |
| M12x1.5 thread | Yellow (ZN) | M12x1.5 8.8 | ..... | 87 Nm |
| ..... | Silver (ZNS) | M12x1.5 8.8 | ..... | 68 Nm |
| ..... | Yellow (ZN) | M12x1.5 10.9 | ..... | 123 Nm |
| ..... | Silver (ZNS) | M12x1.5 10.9 | ..... | 100 Nm |
| ..... | Yellow (ZN) | M12x1.5 12.9 | ..... | 147 Nm |
| ..... | Silver (ZNS) | M12x1.5 12.9 | ..... | 110 Nm |