Front and rear brake linings: checking lining thickness with measuring gauge. If linings are replaced: cleaning brake shafts, checking brake disk thickness and surface, applying grease to wheel centering on alloy wheels. If rear linings are replaced: checking parking brake linings: Notes
Check brake lining thicknesses with measuring gauge at front and rear. For subsequent procedure, refer to 34 00 010 CHECKING THICKNESS OF BRAKE LINING .
NOTE:
Issue a separate invoice for replacing the brake linings.
Remove front and (if necessary) rear disk brake linings. For further information on how to proceed, refer to
- 34 11 000 REMOVING AND INSTALLING/REPLACING BRAKE LININGS ON BOTH FRONT DISK BRAKES ,
- 34 21 200 REMOVING AND INSTALLING OR REPLACING BRAKE LININGS ON BOTH REAR DISK BRAKES .
NOTE:
- Clean brake shafts.
- Replace brake linings if they drop below minimum thickness (refer to 34 00 010 CHECKING THICKNESS OF BRAKE LINING ).
- Replace brake disks if they drop below minimum thickness (refer to DISC BRAKE SPECIFICATIONS ) and in event of scoring, heat cracks, lateral runout or thickness difference.
- Apply a thin coat of grease to wheel centering on light alloy wheels.